BK Silicone Mold Blog

You have decided to offer soap making a try using the cold process approach. There are a couple of different varieties of soap making molds that you can use that will offer different planning to your soaps. Put the lye service, in a consistent and sluggish stream, into the olive oil. Make certain that you stir constantly as you pour the lye mix into the olive oil. Continue stirring up until the item begins to thicken into a honey-like texture. This ought to take about 15-20 minutes. If you desire a fragrant soap, this is the point when you would add about 10-20 drops of vital oil to your mixture, depending on how greatly fragrant you want your Castile soap bars. Include any fragrances, colors or other additives. Hand cut bars of all the very same type now is a great time to add any additionals if you're planning on making plain. Nevertheless, if you want to attempt a number of various types of ingredients, or utilize an fondant mold , there is another option. This is called ...

Cold Process Soap - Starting From Scratch If making melt and pour soap is akin to using a cake mix, "cold process" is making your cake from scratch. You control everything that goes into the pot, and you can make it as "natural" as you want. However, your setup is a little more complicated, and you’ll need to learn a few techniques of the craft first. To make cold process soap, you heat the oils in your soap pot until they’re approximately 100 degrees. Slowly add the lye-water mixture and blend the soap until it thickens to “trace”. After the mixture reaches trace, you add your fragrance, color, and additives and pour it into the mold. The raw soap will take about 24 hours to harden, and about four weeks to cure before it’s ready to use. To get started making cold process soap, you’ll need: A flat, uncluttered workspace with a heat source and access to water Some animal fats or vegetable oils A pitcher of lye-water A soap pot and some other easily found ...

Melt and Pour Soap Making melt pre-made blocks of soap and add your own fragrance Making soap with a "melt and pour" base is sort of like making a cake with a cake mix. What you lose in control of your ingredients and customization of your recipe, you make up for in safety, ease, and convenience. With melt and pour soap making, you buy pre-made blocks of uncolored, unscented soap “base” from a craft store or soap supplier. You melt the soap base in the microwave or a double boiler. When the soap is fully melted, you add your fragrance, color and/or additives. Put it in a mold, and voila, you’re done. The soap is ready to use as soon as it hardens. To get started making melt and pour soap you only need: A counter top or other clean workspace with a microwave or double boiler A heat resistant bowl for the microwave A couple of spoons or whisks Some melt and pour soap base A set of measuring spoons Fragrance, color, or additives, as desired Something to mold the...

The Melt-and-Pour Method The melt-and-pour soapmaking method uses a premade soap base that melts easily. Most soapers melt the soap base in a microwave or a double boiler, though any gentle heat source — for example, a dualtemperature rice cooker — will do. Once the soap base is melted, you simply mix in colorants, fragrances, and other additives; stir well; and pour the mixture into the mold. As soon as the soap sets up (usually within an hour or two), it is ready to use. Many soapers prefer the melt-andpour technique because the clear or white base gives them many design options and because the end product does not need any curing or drying time. The premade base limits the choice of ingredients, but the 40 to 50 available formulations fit the vast majority of soapers’ needs. Meltand- pour soap is also a fun craft to make with children. Though it does not use lye, the soap base can get quite hot during the melting phase, so adult supervision is recommended. The Hot-Process Met...

The hot-process method of soapmaking is similar to the cold-process method in that you start from scratch, which allows you to choose from a wide range of ingredients, and you use lye. However, as the name implies, this method involves the application of heat. With the hot-process method, you either cook your soap on the stove in a large stainless-steel pot or bake it in the oven (keeping a close eye on it at all times) or use a slow cooker. Hot-process  soap mold  can be used immediately; however, without the 4- to 6-week curing and drying time used in the cold-process method, the bars are softer and do not last as long in the shower